- General Designation: PtRh10 DPH-Strong
- Applications: glass manufacturing, glass stirrers, plunger, casting dishes, crucibles, glass fibre bushings
- Product Forms: tube, sheet, wire
- Density (g/cm³): 19.83
PtRh10 DPH-Strong / Pt-10%Rh DPH-Strong
PtRh10 DPH-Strong is an oxide dispersion hardened grade of PtRh10.
It is commonly used in applications which require a structural material with the highest degree of stiffness under service conditions. Main characteristics are its high creep strength at temperatures of up to 1700°C. Optimized material properties contribute to meet the requirements for the shafts of stirrers, stirrer plungers and hollow active parts.
The hardening which results from the oxide particles, represents the most effective strengthening mechanism of the material. Due to the modified microstructure, DPH is considerably less sensitive to corrosion processes along the grain boundaries than comparable materials. These characteristics allow for extended life and results in the precious metal to be used more economically. An example would be reduced wall thicknesses of PtRh10 DPH-Strong compared to PtRh10 or increased lifetime.
Details
- productDescription
- PtRh10 DPH-Strong is an oxide dispersion hardened grade of PtRh10.
It is commonly used in applications which require a structural material with the highest degree of stiffness under service conditions. Main characteristics are its high creep strength at temperatures of up to 1700°C. Optimized material properties contribute to meet the requirements for the shafts of stirrers, stirrer plungers and hollow active parts.
The hardening which results from the oxide particles, represents the most effective strengthening mechanism of the material. Due to the modified microstructure, DPH is considerably less sensitive to corrosion processes along the grain boundaries than comparable materials. These characteristics allow for extended life and results in the precious metal to be used more economically. An example would be reduced wall thicknesses of PtRh10 DPH-Strong compared to PtRh10 or increased lifetime. - Material Behaviour
- ductile
- Forming Process
- machinable, formable
- Electric Resistivity - HT¹
-
- Sources Electrical
- ¹measured and interpolated
- Young's Modulus (GPa)
- 209
- Yield Strength RP0,2 - HT²
-
- Ult. Tensile Strength Rm - HT³
-
- Tensile Fracture Elongation A - HT⁴
-
- Norton⁵
-
- Creep Rupture⁶
-
- Annealed
-
Hardness (HV)Tensile strength (MPa)Yield strength (MPa)Elongation (%)
155 433 288 21 - Property Range
-
Hardness (HV)Tensile Strength (MPa)Yield Strength (MPa)Elongation (%)
130 - 190
- Melting Range
-
From Temperature (°C)To Temperature (°C)
1840 1870
Disclaimer
The information in this data sheet contains only general information on the use of our products or examples for their application. They do not release the customer from a careful inspection of the delivered product for its fitness for the customer's particular purpose of use. Any customer's special requests regarding the particular use of a product will only be authoritative if Heraeus has confirmed to the customer in writing at the time of conclusion of a corresponding contract that the product delivered is fit for the customer's intended use. Heraeus, therefore, does not guarantee the correctness and completeness of the information regarding the customer's intended use. The customer's purchase will be governed exclusively by the written order confirmation of Heraeus and the Heraeus General Terms of Sale and Delivery, which are available at www.heraeus.com/gtc. This data sheet may be subject to changes at any time.
Discuss your solution
Get in contact with experts to discuss further steps to find the optimal solution for your process.